Bought the Wouxun KG-UV8E based on the good experience I had with the KG-UVD1P.
The Color display is very good and rather large for an HT.
The 2600 mAh battery life is exceptionally good and does not drain when powered off as the KG-UVD1P does.
A group of us locals have access to a 1.25 meter repeater and performance on the band is very good even on low power.
The channel / VFO Knob gets tight in spots and the screw holding rubber side cover was so loose it was ready to fall out.
Very loud reception causes the speaker to be distorted.
After purchasing the radio, I found out that there is and E and T version. The difference is that a factory reset of the E version causes the firmware to reboot to Chinese while the T version reboots to English. Of course flipping through the Ching-lish manual will save your day with the E version.
Since I only had an old (pain in the ass) Prolific chipped programming cable I also purchased the Red programming cable. The Red cable was hassle free with Windows 10. No monkeying around with the old drivers from the stone age as is the case with the old Prolific chip. Unlike the expensive RT Systems cables, the red cable was around $15. By the way, the Red cable also works for Baofeng and I’d imagine some Kenwood HT’s as well.
Again no radio is perfect but for the price it was a decent buy for the additional 1.25 meter band. If you are looking for specs or videos, Google it. There is no point in regurgitating the same information that’s already available on countless other Web sites.
Ham Radio Reviews and Events 