Bought a QYT KT8900D (upgraded 2nd gen.) Quad Band receive Dual Band (2 m / 70 cm) transmit mobile radio the other day. Why? I don’t know. Just wanted to see what these Chinese radios are like these days I suppose. I am not using the radio mobile so I am not concerned with the lack of image rejection or other quirks encountered when driving around dense RF fields. If you plan to drive near or in a city, IMHO forget it, this is not the radio for you!
Worked a local 70 cm repeater with it the other day and received a good audio report from several guys. Guess that’s a promising sign for an inexpensive mobile radio.
Taking the easy way out, I loaded up the frequencies I wanted using CHIRP since I have a subscription to Radio Reference. Once I had the Ham Repeaters, Fire and Ambulance info loaded, I then downloaded the contents of the radio into the factory software.
If you plan to use CHIRP as I did, be sure to follow up with the factory software since it offers a whole bunch of settings in the Options panel not available at all in CHIRP. You will find that the factory software Chinglish conversion good enough to understand 99% of the setup.
The factory software does not seem to permit setting up the radio with name only as a default for the display. As a result, after each upload of the code plug, you do have to manually step through the display if you want to change each of the four displayed frequencies over to names. Accomplishing this is done by hitting the ABCD key and then the V/M key on the front panel.
When the radio is power cycled, the names are displayed. If resetting to names was required during each power cycle the radio would have been returned.
For an $85, knock-around ham shack radio the QYT KT8900D appears to be a good buy. Should I run into additional issues I will post them here in the future.